Serbatoi erogatori Omologati modello TANK-FUEL P55-P80 per stoccaggio ed
erogazione di gasolio con bacino al 110%.
D.M. 22/11/2017

Diesel tanks, mobile tanks TANK FUEL E/55 and E/80, homologated by the Ministry of Internal Affairs according to Italian law, D.M. 19/03/90 and D.M. 22/11/2017 and following modifications and extensions (D.M. 12/09/2003). They are equipped with collection basin able to hold 110% of total quantity of the tank. Service ladder, erogation system protection roof (as foreseen by the Ministry Decree). The tanks and the collection basins are made in carbon stainless steel of S235JR quality according to rule UNI EN 10025-2 and externally treated with two coats of primer and a following finish of two coatings of synthetic metallic grey enamels, they are provided with a discharge or cleaning hose with a 1 inch zinc plug, with an upper hose for a level probe, a plug for the connection of the earth cable, a gangway 400mm diameter, complete with bolts and anti petrol gasket with a 3 inch opening with a lockable bayonet fastening and a 90% load limiting valve, an exhaust with a terminal brass fire barrier, a mechanical level indicator and float ,an electric panel and a level probe. Homologated diesel TANK FUEL with erogation system in cabinetThe assembling of the series E55 and E80 foresees a metallic cabinet with a key lock which holds a self priming electric pump with an incorporated by pass (power 220volts) of 56 or 80lt/min, connected to an aspiration system with a no return valve with a calibrated spring and a closing ball valve (useful in case of maintenance to the pumping group), a mechanic oscillating disk litre counter flanged with a three figure partial which can be used as a progressive totalizator or can be reset to zero, automatic nozzle connected erogation tube for fuel(4mt long 56lt/min and 6mt per version of 80lt.min), two anti impurity filters with metallic open net aspiration and an electronic panel with an emergency stop and a control chip for the level probe (pump blocks at the minimum level). All TANK FUELS can be equipped with an outlet water separator
Capacity liters: | 1.200 | 2.000 | 3.000 | 5.000 | 7.000 | 9.000 |
* The protection roof is optional and it is made of a galvanized frame covered by galvanized sheet. It constitutes of four poles placed for the insert in the support for the collection basin, upper frame and covering sheet.


Ask for information

Fill the form to ask for information
From 8:30 am to 6:30 pm

Phone: +39 0861 668551
E-mail: info@fuelsolution.it
Fax: +39 0861 650980 
Factory: Zona industriale Contrada Stampallone, 64036 Cellino Attanasio TE
Copyright 2020 All Rights Reserved Fuel Solution S.r.l. Sede Legale Via Mediana, 18 64032 Atri (TE) - Unità produttiva Zona Ind.le C.da Stampallone 64036 CELLINO ATTANASIO (TE) tel. 0861/668551 fax 0861/650980 P.I. 01931680670
Privacy e Cookies Policy
Powered & Designed by Passepartout