Diesel tanks, mobile tanks TANK FUEL CUBE 56, homologated by the Ministry of Internal Affairs according to Italian law, D.M. 19/03/90 and D.M. 22/11/2017 and following modifications and extensions (D.M. 12/09/2003). They are equipped with collection basin able to hold 110% of total quantity of the tank. Service ladder, erogation system protection roof (as foreseen by the Ministry Decree). The tanks and the collection basins are made in carbon stainless steel of S235JR quality according to rule UNI EN 10025-2 and externally treated with two coats of primer and a following finish of two coatings of synthetic metallic grey enamels, they are provided with a discharge or cleaning hose with a 1 inch zinc plug, with an upper hose for a level probe, a plug for the connection of the earth cable, a gangway 400mm diameter, complete with bolts and anti petrol gasket with a 3 inch opening with a lockable bayonet fastening and a 90% load limiting valve, an exhaust with a terminal brass fire barrier, a mechanical level indicator and float ,an electric panel and a level probe (otional for this version). Diesel tank -TANK FUEL homologated with erogation system CUBE56Erogation group CUBE56 with a self priming electric pump with an incorporated by pass (power 220v) nominal load 56lt/min, connected to an aspiration tubing with an intake valve with an adjustable spring and a ball valve as lock(useful in cases of maintenance to pumping group) including a mechanical oscillating disc litre meter with a three figure partial which can be reset or used as a progressive totalizator, automatic nozzle connected erogation tube for fuels (length 4m) anti impurity filters with a metal open net in the aspiration , an incorporated nozzle case ,an external gear level and a lockable pump stopper, all this enclosed in a self supporting metal structure treated with anti corrosive and guaranteed IP56.All TANK FUELS can be equipped with an outlet water separator
Capacity liters: | 1.200 | 2.000 | 3.000 | 5.000 | 7.000 | 9.000 |
* The protection roof is optional and it is made of a galvanized frame covered by galvanized sheet. It constitutes of four poles placed for the insert in the support for the collection basin, upper frame and covering sheet.